2. Wash your hands! Even though any bubbles formed during application can be squeezed out, dirt/hair/other particles cannot. The cleaner your paws, the better.
3. Clean your PS5 System or device! Use a damp towel or damp paper towel to wipe down the surfaces you will be applying to. Again, the cleaner, the better.
4. Dry, dry, dry! Using a dry and non-shedding towel, dry up any moisture left on the device. Wait a few minutes to make sure that all water has evaporated. This is key. If your device is wet, the skin will be much harder to apply, and the adhesive may not activate properly.
5. Peel it off! Simply grab a corner of the vinyl skin and gently peel the backing away. For any thin areas, be sure to lift carefully as to avoid any stretching of the vinyl.
6. Line it up! Do not apply hard pressure, and the skin will be able to lift up and reposition until you get it right. For most surfaces, the skin will be able to slide on the surface.
7. Stick it on! Now that everything is perfectly aligned, start applying pressure from the center and work your way out towards the edge of the device. This is especially important when working with a device with curved edges. You’ll want to fan out towards the curved edge to smooth out those bumps.
8. Hairdryer! This just became your new best friend. For any surfaces or edges with curvature, do not put pressure right away. Heat the vinyl up with the hairdryer until it is soft, then apply pressure and watch the magic happen. This is key in creating smooth edges, so go slowly. Take your time.
(Wait! What if I don’t own a hairdryer?) If you don’t own a hairdryer, fear not! There is an alternative. It may not work 100% as well as the above, but it should smooth out wrinkles quite satisfactorily. Here’s what you should do. Spot the wrinkles, especially on curved edges. Take a cloth such as your shirt, a microfiber cloth, or any piece of cloth, really. Put pressure on the wrinkled area and rub vigorously. What this does is it creates friction, and thus heat (just like the hairdryer), which then makes the vinyl more pliable and more likely to smooth out. Continue to polish the area, inspect, and repeat as necessary.
9. Bubbles? If there are any bubbles, all you have to do is run your finger over them and guide them to the edge.
10. Enjoy! Show it off! Tag us on our Twitter or Instagram @ps5stickers and we just may repost it! And of course, let us know if you have any questions, comments or concerns. We will always be here to make sure you are completely satisfied!
